2026-10-29 · 12 min read

Expandable Container Homes for Mining Camps: Australian Rules

A mine camp is not a house and it is not a construction site shed. A container home used for camp accommodation runs into two regulatory tracks at once, and they do not replace each other. One track judges the building. The other judges the operator who puts people in it. Here is which rules bite in Queensland and Western Australia, what each one demands of the unit itself, and what a factory can and cannot certify for you.

Buyers planning worker accommodation on a mine site usually start with the wrong question. They ask whether a container home counts as a building and whether the council will approve it. On a mine camp the more useful question is which rules apply at the same time, because on most projects more than one set does, and none of them cancels out the others.

Two tracks run in parallel. The first judges the building: in Queensland that is the temporary accommodation code, and elsewhere it is the ordinary National Construction Code path. The second judges the camp operator and the working conditions inside the accommodation. A factory-built module can satisfy the first track in one state and still sit squarely inside the second one in another state.

Add the tenure question and it becomes three. On some mining tenements the building work is self-assessable and no development approval is needed, on others a development permit must be issued before work starts, and on the rest the local government runs the process. We build expandable container houses and the flat pack and folding lines, so we will be direct about where our scope stops: we supply the unit to specification, but Australian certification, the certifier sign-off and the compliance evidence belong to the buyer and their certifier, not to the factory.

Track one: the temporary accommodation code that governs camp beds

Queensland has a code written specifically for the building a mining company puts its workers in. It is Queensland Development Code Mandatory Part 3.3, Temporary Accommodation Buildings and Structures, and it is not optional for camps. Business Queensland states that MP 3.3 applies to all temporary accommodation buildings provided as part of an employment agreement or where rent is paid, and names mining sites as an example directly.

The code is performance based. It sets mandatory performance criteria and then offers acceptable solutions to meet them, and a building certifier can approve an alternative if the alternative meets the performance criteria rather than copying the solution. Most of the criteria that matter to a buyer converting a container home into camp accommodation are amenity criteria, and they are specific enough to size a camp against before anyone orders a single module.

MP 3.3 criterionWhat the code requiresWhy it decides your layout
P5 / A5 sleeping compartmentsEach sleeping compartment has a double power point, walls extending from floor to ceiling separating each compartment, and a minimum floor area of 5.6 square metres for each bedThe 5.6 square metre figure is a hard floor per bed, not a target, and the full height separating walls decide how many compartments the module can physically hold
P4 / A4 sitingThe building sits on a base of concrete, coarse gravel or similar raised at least 150 mm above the surrounding ground level, or the site is drained to BCA Volume 2 Part 3.1.2, and sits more than 45 m from any industrial or development activitySets the camp layout distance from the pit, the plant and the haul roads, and sets the foundation detail before the module arrives
P8 / A8 dust controlExcept for short term accommodation, surfaces around the building are suitably sealed, with at least 6 m of ground cover onsite where grounds are unsealedOn an unsealed mine lease this is a civil works item, and it also determines whether the camp sits inside or outside the dust management plan
P9 / A9 vehicle accessOnsite roads, driveways, vehicle circulation areas and parking bays comply with AS2890.1-1993 where the building has more than 100 beds or an approval period of more than six monthsA short camp and a permanent village are different civil scope, and the 100 bed threshold is where traffic design usually starts
P10 / A10 outdoor amenityEach sleeping compartment has an outdoor area with a sealed floor protected from the weather by a roof, with access to outdoor space of not less than 30 square metres for every 20 sleeping compartments within 45 m of the entry door, or an attached verandah of at least 4.5 square metresVerandahs and covered walkways between sleeping units and communal facilities become part of the module order, not an afterthought
P12 / A12 bathing and sanitaryResidents have access to a bathing and sanitary facility with separating walls floor to ceiling, located within the building or in a separate building no more than 20 m from the door of the sleeping compartment, or an ensuite within the sleeping compartmentDecides whether bathrooms sit inside the accommodation module, in a separate ablution module, or both, and fixes the module-to-module spacing
P13 / A13 laundryLaundry is not more than 60 m from a sleeping compartment, with one automatic washing machine for each eight beds or part thereof, one fixed wash tub with hot and cold piped water for each 20 beds or part thereof, one double power point, and drying comprising a clothes line or hoist with a minimum of 7.5 m of line per bed, or one heat operated drying cabinet holding a minimum of 6.8 kg for each eight bedsThe laundry ratio is what converts a bed count into a service module count and a service module count into a flat pack order
P15 / A15 refrigerationSleeping compartments have a 100 litre refrigerator each, or access to a 500 litre refrigerator for every 20 beds serviced within a 20 m distance of each sleeping compartmentTwo lawful routes to the same outcome, and the shared route is usually cheaper per bed but needs its own module
P16 / A16 diningDining facilities are provided at a ratio of 0.6 of the total number of residents accommodated, with a seat for each resident and tables providing 600 mm of table length per bed, a floor area of not less than 18.4 square metres for each 20 residents plus an additional 0.92 square metres for every resident in excess of 20, located no more than 70 m from the door of each sleeping compartment servedThe 0.6 ratio is what makes a shift roster work, and it sets the distance from the furthest sleeping unit to the dining hall
P17 / A17 storageUnless the unit is for the exclusive use of one resident, each resident is provided with a personal storage unit that is weatherproof, lockable, at least 1.5 m in height and at least 0.7 cubic metres in volumePer resident lockers are a camp fit-out item, and they are the single most common thing missing from a residential-spec module
P18 / A18 communicationsInternet access is provided with at least one connection point for a computer per 25 beds, one communal computer connected to the internet per 100 beds, and one communal telephone per 100 beds, with telephones in booths or a suitable location for privacySets the number of network points and the telephone run, and the privacy requirement is a space decision

The staged application is where most camp contracts go wrong

MP 3.3 does not apply the same way to every camp, and the variable that switches the requirements on is how long the building is going to be on site. Table T1 of the code stages the application. Where the accommodation is provided under an employment agreement or where rent is paid, a building on site for 42 days or less needs only meet P20, which covers structural soundness and fire and life safety. A building on site for more than 42 days must meet all of the code criteria except P20.

That single threshold is the one to put in the contract, because a camp that is described as temporary but actually runs for three years is a permanent camp by the code. The code also gives the end date: a temporary accommodation building is removed from the site or demolished after an approved duration of no more than 24 months, and Business Queensland states that a building may remain for no more than two years unless the local government approves a longer timeframe before the two year period expires. Only a local government can grant that extension.

Which approval route you need depends on the tenure

The third track is the approval route itself, and on mining tenements it is decided by which Act the tenure sits under rather than by what you build. Building Newsflash 486, issued by the Queensland building codes authority, sets out the position under the Mineral Resources Act 1989 and the Petroleum Gas (Production and Safety) Act 2004, and it is worth reading before a camp order is placed.

Under the Mineral Resources Act 1989, all building work carried out under that Act is self-assessable and does not require a building development approval, and that explicitly includes building work associated with temporary accommodation buildings on mining leases and tenures. The relief is on approval only. Section 236 of the Sustainable Planning Act 2009 still requires self-assessable development to comply with all applicable codes, and the building assessment provisions of the Building Act 1975 are an applicable code, which is how MP 3.3 is pulled in. Under the Petroleum Gas and Production Safety Act 2004 the position reverses: building work is assessable development and a development permit must be issued before the work commences.

SituationApproval routeWhat you still have to prove
Mining lease or tenure under the Mineral Resources Act 1989 in QueenslandSelf-assessable building work, no building development approval requiredCompliance with all applicable codes including MP 3.3, under section 236 of the Sustainable Planning Act 2009. Section 574 makes it an offence to carry out self-assessable development not in accordance with the applicable codes
Tenure under the Petroleum Gas (Production and Safety) Act 2004 in QueenslandAssessable development, a development permit must be issued before work commencesThe applicable codes including MP 3.3, and it is the building certifier who confirms compliance. Section 575 makes it an offence to carry out assessable development without an approval
Anywhere else in Queensland, including a council lease outside a mining tenureLocal government process, and the local government is also the body that can approve a camp staying beyond two yearsMP 3.3 compliance, plus the Form 24 temporary accommodation building checklist completed and displayed on or near the building where it is on site for more than 42 days and provided as part of an employment agreement or where rent is paid

Track two: what the operator owes the people sleeping in the camp

The second track is the one most often missed by suppliers and buyers alike, because it does not judge the building at all. It judges the workplace and the operator. In Western Australia the Work Health and Safety (Mines) Regulations 2022 apply to mining and mineral exploration operations, and they reach straight into the camp.

Regulation 41 is the one that lands on a prefab supply chain. It requires a person conducting a business or undertaking at a workplace to ensure, so far as is reasonably practicable, the provision of adequate facilities for workers including toilets, drinking water, washing facilities and eating facilities, and to ensure those facilities are maintained in good working order and are clean, safe and accessible. It also requires the operator to have regard to the nature of the work, the nature of the hazards at the workplace, the size, location and nature of the workplace, and the number and composition of the workers at the workplace.

Regulation 55D closes the loop that container homes actually sit inside. It requires control measures against psychosocial risks, and among the matters the operator must have regard to are the design and layout of the workplace, the environmental conditions of the workplace, the plant, substances and structures at the workplace, and workplace interactions or behaviours. Regulation 48 covers remote or isolated work and requires a system of work that includes effective communication with the worker. Regulation 640 requires the mine operator to manage risks associated with worker fatigue, and regulation 641 does the same for alcohol and drugs. All of these are properties of the camp as an operating environment.

RegulationWhat it obliges the operator to doWhat that means for a prefab module
Reg 41, facilitiesProvide and maintain adequate and accessible toilets, drinking water, washing and eating facilities in good working order, clean, safe and accessibleThe module order has to include ablution and kitchen capacity that matches the bed count, and the plumbing has to be Australian certified, not merely built
Reg 55D, psychosocial risksImplement control measures against psychosocial risks, having regard to the design and layout and environmental conditions of the workplace, the structures at the workplace, and workplace interactionsLayout, lighting, acoustic separation between sleeping compartments, and room allocation become compliance evidence, not just comfort decisions
Reg 48, remote or isolated workProvide a system of work that includes effective communication with the worker who is isolated from the assistance of other personsCommunications coverage inside the camp and on the approach road is a safety control, which is why MP 3.3 also sets comms ratios
Reg 640 and 641, fitness for workManage risks associated with worker fatigue and with the consumption of alcohol and the use of drugsDay sleeper rooms need blackout and quiet, and camp layout has to support the alcohol and drugs policy the operator runs
Reg 622, mine safety management systemThe MSMS must set out broad safety aims, a brief description of mining operations, arrangements for managing risks under Part 3.1 and regulation 617, the systems and plans used as control measures including the emergency plan under regulation 43 and the health management plan, and the management and supervisory structureThe camp sits inside the mine safety management system, which is why the emergency plan and the camp have to be written as one system

Cyclone region decides whether your module is even a candidate

Most Australian mining camps sit in wind Region C or Region D, and those two regions are where a standard residential-specification container home usually fails on paper. The Australian Building Codes Board publishes the regional wind speed table that Western Australia adopts as WA Table B2D1, and under AS/NZS 1170.2:2021 regions A, B1 and B2 are non-cyclonic while regions C and D are cyclonic.

The numbers are not marginal. At the V5000 annual probability of exceedance the tabulated regional wind speed is 50 metres per second in region A, 67 in B1, 78 in B2, 78 in region C and 95 in region D. At V10000 the figures rise to 51, 69, 81, 81 and 99 metres per second. The ABCB notes that for regions C and D only the maximum values for the region are tabulated, and lower values may apply depending on the distance of the site from the smooth coastline. The WA Cyclone Preparedness Guide issued with the Department of Fire and Emergency Services and Geoscience Australia maps the same regions to places: region C includes Broome, Derby, Wyndham and Denham, and region D includes Port Hedland, Karratha, Onslow, Exmouth and Carnarvon.

For a camp buyer this is a procurement filter, not a detail. A unit engineered and certified for region A cannot simply be dropped into a region D site, and MP 3.3 requires temporary accommodation buildings to comply with the structural wind loading requirements that apply to permanent buildings. Ask for the wind region the structural certification actually covers before you commit to a site.

Wind regionClassificationV5000 regional wind speedWhere Australian mine camps sit
A (0-5)Non-cyclonic50 m/sInland and southern areas, including most of the Goldfields and the Pilbara interior
B1 and B2Non-cyclonic67 m/s and 78 m/sGeraldton, Mullewa, Marble Bar and Kununurra sit in region B, which borders the cyclonic regions
C (maximum)Cyclonic78 m/sBroome, Derby, Wyndham and Denham in Western Australia, and the coastal north Queensland belt
D (maximum)Cyclonic95 m/sPort Hedland, Karratha, Onslow, Exmouth and Carnarvon, which is the Pilbara iron ore belt

What our factory does and does not do

Being clear about this protects both sides. Our expandable double-wing house is built on a welded galvanized square tube frame with eight cast corner castings for hoisting, 18 mm cement board flooring with PVC or SPC finish, and insulated wall panels, with gable and flat roof options and a flat roof developed for the Australian market at 2.4 m internal height against 2.3 m for gable. Australia certified plumbing and Australian standard window and door options are available. Every dimension, panel count and fitting on the 20 ft export specification is published, and the full comparison across the range sits on the specifications page with the drawings in the downloads section.

What we do not do is certify your camp for a wind region, sign a building certificate, or accept responsibility for how a camp is operated. Those sit with a registered building certifier, the operator and the authority. What we can do is build to the specification your certifier asks for, confirm in writing what the unit is and is not certified for, and be precise about the details that decide a camp layout, such as the number of sleeping compartments the module can carry under the 5.6 square metre per bed rule once the bathroom module, kitchen and wall zones are subtracted from the roughly 37.5 square metres of expanded floor area.

The questions to settle before you order

Camp procurement goes wrong on specifics that were never written down. These are the ones worth closing in writing before the first module is built, and most of them cost nothing to answer while they are still questions.

  • Confirm the state and the tenure, because the state decides which building code applies and the tenure decides who approves the work.
  • Get the camp duration in writing, and confirm which side of the 42 day threshold in Table T1 of MP 3.3 it falls on.
  • Decide who certifies the camp and start that conversation early, since a certifier cannot approve an alternative that the order has already locked in.
  • Get the wind region of the site from the AS/NZS 1170.2 wind region map or from the local authority, and check it against the wind region covered by the structural certification of the unit you are buying.
  • Count the beds per module against the 5.6 square metre per bed rule and the floor to ceiling separating wall requirement before you fix the module count.
  • Convert the bed count into ablution, kitchen, laundry, refrigeration and dining capacity using the ratios in MP 3.3, and confirm which of those go inside the accommodation module and which go into separate service modules.
  • Check the 45 metre separation from industrial or development activity and the 30 metre outdoor space rule when you lay out the camp, not when you move the first unit.
  • Confirm the 100 bed threshold for AS2890.1-1993 compliant on site roads and parking, and whether the six month approval period will be exceeded.
  • Specify Australian certified plumbing and fittings explicitly, because that is what regulation 41 in Western Australia makes the operator responsible for.
  • Confirm who provides the external incoming power supply, and whether the camp is air conditioned, because the fly screen requirement in MP 3.3 depends on the answer.
  • Ask for the emergency plan, the health management plan and the camp layout to be written together inside the mine safety management system, rather than as separate documents.
  • Put the post code and the module delivery window into the contract, with the site access and the module footprint agreed before the first shipment is booked.

Frequently asked questions

Do container homes need approval for a mining camp in Australia?

It depends on the state and the tenure, and on one thing in particular. In Queensland, building work on a mining lease or tenure under the Mineral Resources Act 1989 is self-assessable and does not require a building development approval, but it must still comply with all applicable codes including Queensland Development Code Mandatory Part 3.3 for temporary accommodation buildings, under section 236 of the Sustainable Planning Act 2009. Under the Petroleum Gas (Production and Safety) Act 2004 the work is assessable development and a development permit must be issued before it commences. Elsewhere you are in the ordinary local government building approval process, and a temporary camp can stay on site for no more than two years unless the local government approves a longer timeframe first.

What is MP 3.3 and does it apply to a mine camp?

Queensland Development Code Mandatory Part 3.3, Temporary Accommodation Buildings and Structures, is the Queensland code written specifically for buildings that house workers on site. Business Queensland states that it applies to all temporary accommodation buildings provided as part of an employment agreement or where rent is paid, and names mining sites as an example. It is performance based, so it sets mandatory performance criteria and offers acceptable solutions, and a building certifier can approve an alternative that meets the performance criteria instead of using the solution as written. A camp on site for more than 42 days has to meet all of the criteria except P20, which covers short term structural adequacy and fire and life safety.

How long can a temporary camp stay on site?

A temporary accommodation building is removed from the site or demolished after an approved duration of no more than 24 months under the acceptable solution for P1 of MP 3.3, and Business Queensland states that a temporary accommodation building can remain on site for no more than two years unless the local government approves a longer timeframe before the two year period expires. Only a local government can approve that extension. If your camp is planned to run longer, that conversation needs to happen at the start rather than at the end of the second year.

Does a mining camp in a cyclone area need a cyclone rated container home?

Most Australian mine camps are in wind region C or D, which are the cyclonic regions under AS/NZS 1170.2:2021 as adopted by the Australian Building Codes Board. MP 3.3 requires temporary accommodation buildings to comply with the structural wind loading requirements that apply to permanent buildings, so a unit certified for region A cannot simply be sited in region D. At the V5000 annual probability of exceedance the tabulated regional wind speed is 95 metres per second in region D and 78 metres per second in region C, against 50 metres per second in region A. Region D includes Port Hedland, Karratha, Onslow, Exmouth and Carnarvon, and region C includes Broome, Derby, Wyndham and Denham in Western Australia.

Who is responsible for the camp compliance evidence?

Not the factory. A registered building certifier signs off the design and the completion, and the operator carries the workplace obligations. In Western Australia the Work Health and Safety (Mines) Regulations 2022 make the operator responsible for adequate and accessible facilities including toilets, drinking water, washing and eating facilities under regulation 41, for psychosocial risk control measures under regulation 55D, for effective communication with isolated workers under regulation 48, and for fatigue and alcohol and drugs risks under regulations 640 and 641. The camp also sits inside the mine safety management system under regulation 622, which must include the emergency plan and the health management plan. What a factory should give you is a unit built to the specification your certifier has approved, with its own certification scope stated in writing.

Related guides

Explore these models

Not sure which format fits your project?

Send your target units, destination port and intended use — we reply with layout options, freight format and an indicative quote.

Start an inquiry