2026-10-17 · 9 min read

Twelve Questions to Ask a Container Home Supplier Before You Order

Most supplier comparisons measure the wrong things. These twelve questions are designed so that a buyer's answer reveals the supplier — whether the factory has done this before, whether the documentation is real, and whether the price contains an assumption nobody said out loud.

Comparing container home suppliers is awkward because the product photographs look similar, the quotations are formatted alike, and every supplier says the same four things: factory direct, OEM capable, competitive price, on time delivery. None of that is a differentiator. The differentiators are all in the answers to specific questions, and most buyers never ask them because the questions are not obviously ones a buyer would know to ask.

The twelve below are ordered roughly by how much damage the wrong answer causes. Some are ordinary commercial questions. A few are deliberately awkward — asking about what went wrong, what is excluded, and who owns a step at 7am on delivery day. Suppliers who answer those directly are worth more than suppliers who answer the first six warmly.

A note on how to use this: ask them in writing, before you have committed to anything, and ask the same questions of every supplier. The value is not in any single answer — it is in comparing how consistently the answers hold up across the same set of questions.

The twelve at a glance

If you only have time for one pass, this is the whole set with what a good answer sounds like.

Question groupQuestionA good answer sounds like
FactoryWhich models do you build yourself?A clear split, with sourcing named where it exists
FactoryWhat is running this month?A specific number tied to current orders, not a capacity ceiling
FactoryCan I see a unit before it ships?An invitation, or unedited recent photographs plus a reference customer
FactoryWhat steel grade is the frame?A named grade and section, without hesitation
SpecificationWall build-up, layer by layer?Panel type, thickness, insulation, lining and cladding named individually
SpecificationFrame section and finished weight?Both figures, with shipped and installed weight separated
SpecificationHow is the roof sealed?Factory sealing at fold positions, with the waterproofing system named
SpecificationWhich roof type and internal height?2.3m gable and 2.4m flat, with the market each was developed for
CommercialWhat does the price exclude?An exclusion list volunteered, not extracted
CommercialHow many units per container?A structural answer per format, consistent with the packing plan
CommercialWhat drives the lead time?Order volume and model mix named as the drivers
UncomfortableWho owns each step to my pad?A named owner for every step, including crane and trades
UncomfortableIf something is wrong on arrival?A named process, a named contact, a stated remedy

The factory questions

These four establish whether you are talking to a manufacturer or to an intermediary.

  • Which models do you build yourself, and which do you source? A supplier who builds two of the five formats on their site and sources the rest should say so plainly. The answer tells you where your quality control actually applies.
  • What is your annual production capacity, and how much of it is running normally? Capacity claims are easy and hard to verify. Ask what is running this month, not what the factory could run in theory.
  • Can I see a completed unit before it ships, or a video walkthrough of one in production? Refusal is informative. A supplier confident in their own work rarely declines, and the walkthrough reveals panel finishes, joint quality and how the interior actually looks in a way no photograph does.
  • Where does the steel come from, and what grade does the frame use? This is the single most revealing technical question on the list, because it goes to the core of what you are buying. It also separates manufacturers from traders faster than anything else.

The specification questions

These five turn a photograph into a specification you can compare.

  • What is the wall build-up, layer by layer? You want the panel type and thickness, the insulation, the internal lining and the external cladding named — not a phrase like high quality panel.
  • What is the frame section and steel grade, and what is the finished unit weight? Ask for both the shipped weight and the installed weight. A supplier who cannot give the steel grade cannot give the weight either.
  • How is the roof sealed at the fold positions, and what is the waterproofing system? Factory sealing is what makes repeat folding possible without a waterproofing project between moves.
  • Which roof type do you supply and what internal height does each give? For Australia the clearance question is a requirement, not a preference — 2.3m gable versus 2.4m flat is a real specification difference.
  • What documentation ships with the unit? Reference floor plans, installation instructions, the electrical layout, the water supply and drainage diagram, the packing plan. Ask for a sample of each before ordering, not after.

The commercial and logistics questions

These three separate a supplier who has shipped before from one who has not.

  • What does the price include, and what does it exclude? The exclusion list is the most useful page in any quotation. A supplier who lists site works, crane placement and trade connections as exclusions is giving you an honest scope. One who does not mention them is making an assumption.
  • How many units fit in one shipping container, for each format? The answer is structural, not negotiable, and it determines the freight cost per unit for the whole programme.
  • What drives the lead time, and what changes it? A supplier who ties lead time to order volume and model mix is describing something real. One who quotes a flat number regardless of your order is quoting a target, not a commitment.

The four uncomfortable questions

These are the ones that separate a supplier you can build a programme with from one you will spend the programme managing.

  • What goes wrong most often on your orders, and who handles it? A supplier with a real aftersales process names the common failures and the owner. One who answers vaguely has not thought about it, and the failure will land on you.
  • Who owns each step between our order and our pad — factory, freight, customs, transport, crane, trades, compliance? This is the question that prevents the unowned step, the thing most commonly blamed on the supplier but almost always a scope boundary nobody drew.
  • What is your spare parts and aftersales position for a customer in Australia or New Zealand, and how does a warranty claim actually get handled across a border? The honest answer involves logistics and a named contact. The dishonest answer is a brochure.
  • If the unit arrives and something is wrong, what is the remedy, who pays, and how long does it take? Ask for the process, not the promise. A remedy you cannot execute from another country is not a remedy.

How to read the answers

The pattern matters more than any single reply. Three signals that a supplier is telling you the truth: they volunteer exclusions you did not ask about; they ask what your site conditions and destination are before quoting; and they tell you where they cannot help, usually because it is not their job or not their market.

Three signals to slow down on: a refusal to name the steel grade; a lead time that does not move with order volume; and a price that is materially below everyone else with no scope difference to explain it. That last one is the one most buyers learn about expensively — a quotation that is not comparable is usually not cheaper, it is differently scoped.

Send the twelve in advance. We answer all of them — including the four uncomfortable ones — and if a question exposes something we cannot do for your market, we will say so rather than find out at order stage. The spec-sheet guide covers how to read the specification lines these questions produce, and the cost framework guide covers how to compare the quotations that come back.

Frequently asked questions

What is the most important question to ask a container home supplier?

What is the wall build-up, layer by layer, and what steel grade is the frame. Those two answers tell you whether the supplier can describe the product at specification level, and whether they have a quality control system. A supplier who answers with a marketing phrase rather than a layer list is describing a product category, not a product.

Should I be worried if a supplier is significantly cheaper than the others?

Treat it as a signal that the quotations are not comparable rather than as a saving. The gap is usually explained by a scope difference — a lighter floor build-up, a thinner panel, a paint system that is primer only, a freight assumption that does not match the container count. Ask for the exclusions list on every quote, including the cheap one, and compare like with like before drawing any conclusion.

Is it a problem if a supplier declines a factory visit or video walkthrough?

It is a signal worth weighting heavily. A supplier confident in their own work has little reason to refuse, and a walkthrough of a unit in production reveals panel finishes, joint quality and real interior proportions that no photograph does. If a visit is genuinely not possible, ask instead for recent unedited photographs of finished units and the name of a customer you can speak to.

How do I know what is included in the price?

Ask for the exclusion list explicitly, and treat a quotation with no exclusions as incomplete. Site works, foundation, crane placement, licensed trade connections, compliance and approval fees are site-side costs that no factory price should contain. A supplier who states those exclusions clearly is giving you a scope you can compare against another supplier; one who does not mention them is making an assumption on your behalf.

What should I ask about lead time?

Ask what drives it rather than accepting a number. A supplier who ties lead time to order volume and model mix is describing something real and auditable. One who quotes a flat figure regardless of your order is quoting a target. The second question worth asking is what happens if the order slips — what triggers the delay, who tells you, and what the remedy is.

Related guides

Explore these models

Not sure which format fits your project?

Send your target units, destination port and intended use — we reply with layout options, freight format and an indicative quote.

Start an inquiry